| Issue |
ITM Web Conf.
Volume 19, 2018
Computer Applications in Electrical Engineering (ZKwE’2018)
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 2 | |
| DOI | https://doi.org/10.1051/itmconf/20181901001 | |
| Published online | 21 September 2018 | |
The forming and emission of high power electromagnetic pulses
Gdańsk University of Technology, Faculty of Electrical and Control Engineering, Narutowicza Str. 11/12, 80-233 Gdańsk, Poland
*
Corresponding author: kazimierz.jakubiuk@pg.edu.pl
An impulse energy source, a power conditioning system and an electromagnetic field emitter are essential to generate an electromagnetic field pulse (EMFP) with a specific frequency bandwidth. Selected simulation results for a power conditioning system consisting of a fuse opening switch and a paraboloidal electromagnetic emitter have been presented in this article. The synthetic system examined in the simulation is powered by an impulse capacitor instead of a flux compression generator (FCG) used in practice. The obtained results confirm that pulse generation and emission of high-power EMFP is possible.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.