| Issue |
ITM Web Conf.
Volume 19, 2018
Computer Applications in Electrical Engineering (ZKwE’2018)
|
|
|---|---|---|
| Article Number | 01012 | |
| Number of page(s) | 2 | |
| DOI | https://doi.org/10.1051/itmconf/20181901012 | |
| Published online | 21 September 2018 | |
Calculation of energy loss due to macroscopic eddy currents in ferromagnetic materials considering hysteresis loop
1
Czestochowa University of Technology, Department of Electrical Engineering, Ph.D. student
2
Czestochowa University of Technology, Department of Electrical Engineering, Czestochowa, Poland
* Corresponding author: michal.bereznicki@interia.pl
The paper presents an algorithm for calculating the energy loss due to macroscopic eddy currents considering the non-linearity of magnetization characteristics and magnetic hysteresis. It was found that for non-oriented steel sheet with a silicon content of 6.5% and thickness 0.1 mm the consideration of non-linearity and magnetization characteristics has a little effect on the energy loss, at least up to 400 Hz. In the application of the algorithm, there are some limitations resulting from the assumption of the average value of the induction flux in the sample cross-section, numerical problems and hysteresis loop shapes.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.