Artificial neural network modelling of cutting force components in milling
ITM Web Conf., 15 (2017) 02001
Published online: 2017-12-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Applying a Neural Network to Predict Surface Roughness and Machining Accuracy in the Milling of SUS304
Ming-Hsu Tsai, Jeng-Nan Lee, Hung-Da Tsai, et al.Electronics 12 (4) 981 (2023)
https://doi.org/10.3390/electronics12040981
Reconstruction of Process Forces in a Five-Axis Milling Center with a LSTM Neural Network in Comparison to a Model-Based Approach
Berend Denkena, Benjamin Bergmann and Dennis StoppelJournal of Manufacturing and Materials Processing 4 (3) 62 (2020)
https://doi.org/10.3390/jmmp4030062
441 (2020)
https://doi.org/10.1109/MetroAeroSpace48742.2020.9160289
Effect of technological parameters on vibration acceleration in milling and vibration prediction with artificial neural networks
Ireneusz Zagórski, Monika Kulisz, M. Kulisz, et al.MATEC Web of Conferences 252 03015 (2019)
https://doi.org/10.1051/matecconf/201925203015
Application of neural network in determination of parameters for milling AZ91HP magnesium alloy with surface roughness constraint
Monika Kulisz, Ireneusz Zagórski, M. Kulisz, et al.MATEC Web of Conferences 252 03017 (2019)
https://doi.org/10.1051/matecconf/201925203017
Advances in Manufacturing II
Ireneusz Zagórski and Monika KuliszLecture Notes in Mechanical Engineering, Advances in Manufacturing II 176 (2019)
https://doi.org/10.1007/978-3-030-16943-5_16
644 (2019)
https://doi.org/10.1109/MetroAeroSpace.2019.8869605
Trochoidal Milling and Neural Networks Simulation of Magnesium Alloys
Ireneusz Zagórski, Monika Kulisz, Mariusz Kłonica and Jakub MatuszakMaterials 12 (13) 2070 (2019)
https://doi.org/10.3390/ma12132070
Measurements of Forces and Selected Surface Layer Properties of AW-7075 Aluminum Alloy Used in the Aviation Industry after Abrasive Machining
Jakub Matuszak, Mariusz Kłonica and Ireneusz ZagórskiMaterials 12 (22) 3707 (2019)
https://doi.org/10.3390/ma12223707
Effect of the AWJM Method on the Machined Surface Layer of AZ91D Magnesium Alloy and Simulation of Roughness Parameters Using Neural Networks
Ireneusz Zagórski, Mariusz Kłonica, Monika Kulisz and Katarzyna ŁozaMaterials 11 (11) 2111 (2018)
https://doi.org/10.3390/ma11112111