| Issue |
ITM Web Conf.
Volume 16, 2018
AMCSE 2017 - International Conference on Applied Mathematics, Computational Science and Systems Engineering
|
|
|---|---|---|
| Article Number | 03002 | |
| Number of page(s) | 5 | |
| Section | Power Systems | |
| DOI | https://doi.org/10.1051/itmconf/20181603002 | |
| Published online | 09 January 2018 | |
Model Residual Stress by Finite Element Method
UPB, IMST Faculty, TMS Department, 060042 Splaiul Independentei 313, Bucharest, Romania.
* Corresponding author: delia.garleanu@upb.ro
This paper presents an original model developed by finite element method to simulate the behavior of the material to the method “Blind Hole Drilling”, to determine the residual stress. Modeling of this method is possible through the use of the “Birth and Death” which have some elements of ANSYS library. After obtaining the analysis of movements, appropriate loads, a node located from the center hole at a radius calculated. In this way it is easier to estimate the stresses and deformations of a piece. Several measurements are made and based on this model is given in ANSYS. In this way we can have a map of tensions and deformations in a material
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.