| Issue |
ITM Web Conf.
Volume 12, 2017
The 4th Annual International Conference on Information Technology and Applications (ITA 2017)
|
|
|---|---|---|
| Article Number | 01030 | |
| Number of page(s) | 6 | |
| Section | Session 1: Robotics | |
| DOI | https://doi.org/10.1051/itmconf/20171201030 | |
| Published online | 05 September 2017 | |
Design of Slag Thickness Fuzzy Control System for Slag Adding Robot
College of Machinery and Automation, Wuhan University of Science and Technology, Wuhan, China
* 323111116@qq.com
** 598258094@qq.com
*** 13627293882@163.com
**** Dengjianghong325@163.com
According to the defect of artificial slag adding and open-loop slag adding in continuous casting mold, a slag adding robot with real-time slag thickness detection and feedback control is developed. That is, the laser ranging sensor is applied on the basis of the open-loop slag adding robot. Then the real-time information of in-mold slag thickness can be obtained. And the coupling relation of three factors: real-time slag thickness, mold work slagging speed and robot slagging rate are taken into comprehensive consideration. Therefore fuzzy controller is built to realize the fuzzy PID control of the slagging robot feeding electro-mechanical system and achieve the intelligent control of slag thickness in the mold. The simulation and application results show that the slag adding robot based on fuzzy PID control has good effect and quick response. The slag can be pressed according to the requirement, which is beneficial to energy saving and consumption reduction, and improves the quality of the billet.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.