| Issue |
ITM Web Conf.
Volume 13, 2017
2nd International Conference on Computational Mathematics and Engineering Sciences (CMES2017)
|
|
|---|---|---|
| Article Number | 01033 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/itmconf/20171301033 | |
| Published online | 02 October 2017 | |
Analysis of Output Voltage Harmonics of Voltage Source Inverter used PI and PID Controllers Optimized with ITAE Performance Criteria
1 Bingol University, Department of Electrical and Electronics Engineering, Bingol, Turkey
2 Inonu University, Department of Electrical and Electronics Engineering, Malatya, Turkey
⁎ Corresponding author: ogul@bingol.edu.tr
In this article, PI and PID controllers are designed using ITAE (Integral Time Absolute Error) Performance Criteria in order to obtain the controller parameters assuring improved response at selected load. The voltage source inverter (VSI) including PI and PID controllers whose parameters are estimated by minimizing errors using ITAE performance criteria are modeled in MATLAB environment. The stability analysis of the control system will be presented. VSI controlled with the PI-ITAE and the PID-ITAE controller are simulated for various loads and the results are analyzed using FFT analysis for observing and comparing the total harmonic distortion (THD) of the output voltage. The quality of the sinusoidal waveform is more important than the quantity and in order to achieve that, we need to reduce the harmonic content in the output.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.