Issue |
ITM Web Conf.
Volume 19, 2018
Computer Applications in Electrical Engineering (ZKwE’2018)
|
|
---|---|---|
Article Number | 01005 | |
Number of page(s) | 2 | |
DOI | https://doi.org/10.1051/itmconf/20181901005 | |
Published online | 21 September 2018 |
Selected issues of control voltage source inverter with self-excited synchronous generator as DC grid voltage source
Maritime University of Szczecin, Institute of Marine Automation and Electrotechnics, 70-500 Szczecin, Poland
*
Corresponding author: m.kozak@am.szczecin.pl
Synchronous self-excited generators are the most popular AC voltage sources installed in power plants of seagoing vessels. Because of fuel savings varying revolutions Diesel drives can be found on selected types of ships (platform support vessels, cable layers, tug boats etc.). Very interesting issue is use of such type of alternator working with inverter acting as rectifier in direct current grid system. In direct current type of electrical grid the problems with synchronization and reactive power balance are absent. As the control method most suitable to use is modified version of field oriented control (FOC) known from induction machines. Aforementioned method involves decoupling of currents and control voltages to flux and torque components and keeping them in the most optimal condition. Theoretical background of inverter and synchronous generator adopted FOC control method along with numerical situations and experimental results obtained in laboratory test bench of such a system were included in following article.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.