| Issue |
ITM Web Conf.
Volume 19, 2018
Computer Applications in Electrical Engineering (ZKwE’2018)
|
|
|---|---|---|
| Article Number | 01023 | |
| Number of page(s) | 2 | |
| DOI | https://doi.org/10.1051/itmconf/20181901023 | |
| Published online | 21 September 2018 | |
Comparison of different configurations of the solar and wind power supply system with energy storage using Matlab
Poznan University of Technology, Piotrowo 3A, 60-965 Poznan, Poland
*
Corresponding author: tomasz.jarmuda@put.poznan.pl
In the study the hybrid model of the solar and wind power supply system with electrochemical energy storage developed in MATLAB & SIMULINK and MS Visual Studio environments was presented. Simulation tests of the system with rated power of 60 kW were conducted in different configurations of connections with the receiver with the set load characteristics. For each configuration of the system the length of periods with no power supply of the receiver was calculated along with the value of the energy consumed and given to the power grid in the case of application of the electrochemical storage and its lack.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.