ITM Web Conf.
Volume 19, 2018Computer Applications in Electrical Engineering (ZKwE’2018)
|Number of page(s)||2|
|Published online||21 September 2018|
The influence of switched reluctance generator winding parameters on output power at different rotational speeds
Opole University of Technology, Faculty of Electrical Engineering Automatic Control and Informatics, Opole, Poland
Corresponding author: firstname.lastname@example.org
The paper presents the influence of the winding parameters of a switched reluctance generator on output power at different rotational speeds. All tested generators were designed on the basis of the same magnetic circuit. In the paper the influence of windings parameters on current and torque dependence on the rotor position angle are shown. The calculations were performed in the authors’ own computing environment dedicated to optimisation, based on a two-stage genetic algorithm. A FEMM program was used for magnetostatic calculations, whereas the dynamic calculations were performed on the authors’ own simulation program. The basic parameters of the tested generators were determined during the study.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.