| Issue |
ITM Web Conf.
Volume 22, 2018
The Third International Conference on Computational Mathematics and Engineering Sciences (CMES2018)
|
|
|---|---|---|
| Article Number | 01013 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/itmconf/20182201013 | |
| Published online | 17 October 2018 | |
Option of the Optical-mechanical Positioning of the Sensor and Sample in the Magnetometer. Determination of Magnetic Susceptibility of Powders and particles
1
Moscow technological university, Moscow, RF
2
Department of Mathematics, University of Fırat, Elazıǧ, Turkey
* Corresponding author: anna.sandulyak@mail.ru
In Faraday's magnetometer it is recommended to apply remotely the located poles hemispheres. In this case (and similar cases) there is a need for expeditious and exact positioning of the measuring sensor (Hall) and the studied sample – for obtaining the most authentic characteristics of induction and its gradient, identification and use of a zone of stability. This problem is solved by the corresponding opticalmechanical system of positioning. It consists of the laser modules promoting aim positioning, the Web camera promoting final positioning. On the received concentration dependences of magnetic susceptibility of powder samples existence of limited line sections is confirmed that gives the chance to define susceptibility of particles. The critical relation to use for the similar purposes of samples (disperse) in the form of colloids and suspensions expresses.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.