| Issue |
ITM Web Conf.
Volume 22, 2018
The Third International Conference on Computational Mathematics and Engineering Sciences (CMES2018)
|
|
|---|---|---|
| Article Number | 01023 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/itmconf/20182201023 | |
| Published online | 17 October 2018 | |
Risk Assessment with Failure Mode and Effects Analysis and Grey Relational Analysis Method in Plastic Injection Process
Munzur University, Department of Industrial Engineering, Tunceli, Turkey
* Corresponding author: senelbilgin@gmail.com
This study aims to evaluate the risks that may arise during the production process in a plastic injection manufacturing enterprise with traditional Failure Mode and Effect Analysis (FMEA) and Grey Relational Analysis (GRA). Although it is a widely used analytical technique that helps to identify and reduce the risks of failure in a process, the Failure Mode and Effects Analysis (FMEA) has some drawbacks that the different risks can have the same risk priority values and the weight of risk factors is not take into consideration. This situation has been tried to be eliminated by integrating the FMEA with the GRA. As a result, it is seen that the order of risk priority values of the identified failure changes according to both methods.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.