Issue |
ITM Web Conf.
Volume 30, 2019
29th International Crimean Conference “Microwave & Telecommunication Technology” (CriMiCo’2019)
|
|
---|---|---|
Article Number | 06001 | |
Number of page(s) | 8 | |
Section | Passive Components (5) | |
DOI | https://doi.org/10.1051/itmconf/20193006001 | |
Published online | 27 November 2019 |
Design of RF filters with high selectivity on monolithic ceramic blocks
BMSTU, Electronics and laser technology Department, 105005, Moscow, Russia
* Corresponding author: semernyare@gmail.com
The paper presents the results of the development of quasielliptic filters on monolithic ceramic blocks. A circuit analysis of equivalent filter circuits is carried out using the coupling matrix method. A novel topology of a monolithic filter is being studied with the aim of obtaining increased frequency-selective properties due to the implementation of the attenuation poles. High cross-coupling values on ceramic monoliths with large inner metalized holes were obtained. The engineering method of adjusting the frequency position of the attenuation poles by trimming capacitive stubs is realized. Based on the performed analysis, as well as electromagnetic modeling, a monolithic ceramic filter was manufactured. The measurements results of the S-parameters for obtained models are presented.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.