ITM Web Conf.
Volume 30, 201929th International Crimean Conference “Microwave & Telecommunication Technology” (CriMiCo’2019)
|Number of page(s)||7|
|Section||Microwave Measurements (7)|
|Published online||27 November 2019|
Special aspects of modulation RCS measurement in Ka-band
Bauman Moscow State Technical University 5, 2nd Baumanskaya Str., 105005, Moscow, Russia
* Corresponding author: email@example.com
Radar reflectors are used as standards for radioelectronic devices calibration, as navigation beacons for air and naval traffic control and for radar visibility increase. Controlled (parametric) reflectors change reflected signal characteristics. This leads to appearance of easily detectable additional frequency components on modulation frequency. Ka-band parametric reflector design, consisting of horn reflector and phase switch 0°/180° board, is suggested. Technique of parametric reflector modulation RCS measurement, using complex envelope of reflected signal in every phase switch state, is suggested. Measuring bench description is given. Comparative analysis of theoretical calculations and experimental results is carried out. Accuracy of modulation RCS measurement according to the said technique is obtained experimentally. Measurements accuracy constraints are detected.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.