| Issue |
ITM Web Conf.
Volume 32, 2020
International Conference on Automation, Computing and Communication 2020 (ICACC-2020)
|
|
|---|---|---|
| Article Number | 02006 | |
| Number of page(s) | 4 | |
| Section | Communication | |
| DOI | https://doi.org/10.1051/itmconf/20203202006 | |
| Published online | 29 July 2020 | |
Performance analysis of Strain sensor based on Fiber Bragg Grating
1 Department of Electronics, Ramrao Adik Institute of Technology, Navi Mumbai India
2 Department of Electronics, Ramrao Adik Institute of Technology, Navi Mumbai India
3 Department of Electronics, Ramrao Adik Institute of Technology, Navi Mumbai India
4 Department of Electronics, Ramrao Adik Institute of Technology, Navi Mumbai India
* Corresponding author: savita.bhosale@rait.ac.in
A fiber Bragg grating can be worked as reflector, it is constructed in a short section of optical fiber that reflects light of specific wavelength and allow to pass remaining wavelengths. This is possible by creating a periodic change in refractive index within the fiber core. The change in the modal index of fiber caused due to strain results in a Bragg wavelength. This work describes performance of Fiber Bragg Gratings as a strain sensor at 1550nm wavelength is considered for simulation, corresponding dynamic strain and wavelength shifts are analysed. This performance analysis is useful especially for intrusion detection system where environments are harsh. This sensor is compatible with data communication system and can be used for remote sensing.
Key words: Fiber Bragg Grating / Optical sensors / Strain / Wavelength
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.