| Issue |
ITM Web Conf.
Volume 47, 2022
2022 2nd International Conference on Computer, Communication, Control, Automation and Robotics (CCCAR2022)
|
|
|---|---|---|
| Article Number | 03018 | |
| Number of page(s) | 5 | |
| Section | Control Technology and Robotics Technology | |
| DOI | https://doi.org/10.1051/itmconf/20224703018 | |
| Published online | 23 June 2022 | |
Simulation study on the start-up process of heat recovery steam generator in F-class peak shaving combined cycle power plant
SEPCO Electric Power Construction Corporation, Jinan 250001, China
* Corresponding author: lhtsepco@163.com
Peak shaving of power systems and the improvement of balance adjustment capabilities are important issues that need to be resolved in the energy sector to carbon neutrality. Moderately constructing some gas-steam combined cycle power stations is one feasible way to alleviate this issue. Heat recovery steam generator plays a vital role in the safe and reliable operation of gas-steam combined cycle power plant. Startup process of heat recovery steam generator in a typical F-class peak shaving combined cycle plant under cold, warm and hot modes was researched in this paper. Parameters of heat recovery steam generator increase with the increase of gas turbine load. The shortest cold, warm and hot start-up time are 60 minutes, 50 minutes and 35 minutes, respectively. Temperature and pressure rise rate of heat recovery steam generator should be strictly controlled during start-up process. It is recommended to start-up the heat recovery steam generator in hot or warm mode.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.