| Issue |
ITM Web Conf.
Volume 47, 2022
2022 2nd International Conference on Computer, Communication, Control, Automation and Robotics (CCCAR2022)
|
|
|---|---|---|
| Article Number | 03042 | |
| Number of page(s) | 7 | |
| Section | Control Technology and Robotics Technology | |
| DOI | https://doi.org/10.1051/itmconf/20224703042 | |
| Published online | 23 June 2022 | |
Research on 1000MW double reheat ultra-supercritical six-cylinder six-exhaust steam-turbine generator set
1 Datang Dongying Power Generation Co. Ltd, Dongying, China
2 Datang Northeast Electric Power Test Research Institute Co. Ltd, Changchun, China
* Corresponding author: makuiyuan@163.com
This paper introduces the application technology of a millionsecond reheat ultra-supercritical six cylinder six exhaust steam turbine, through the analysis of six cylinder six exhaust steam overall design scheme, to calculate the stability of the shafting, and compared with the five cylinder four exhaust schemes. The results show that, the design scheme of six cylinder six exhaust steam turbine is breakthrough in the stability of shafting, at the same time, optimize the exhaust parameters of the low-pressure cylinder, make the unit back pressure at 2.9 kPa. Through the comparison of two schemes, six cylinder six exhaust steam turbine scheme can save the standard coal consumption by about 2.28 g/kWh per year, save coal cost about 6.27 million. However, the initial investment increased by 55 million, and the investment cost can be recovered in 8.8 years, its has high investment value and social benefits.
Key words: Ultra supercritical / The second reheat / Six cylinder six exhaust steam / Stability of shafting / Benefit analysis
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.