| Issue |
ITM Web Conf.
Volume 50, 2022
Fourth International Conference on Advances in Electrical and Computer Technologies 2022 (ICAECT 2022)
|
|
|---|---|---|
| Article Number | 03002 | |
| Number of page(s) | 6 | |
| Section | Electrical & Power Electronics | |
| DOI | https://doi.org/10.1051/itmconf/20225003002 | |
| Published online | 15 December 2022 | |
Observer-Based Quadrature Signal Generator for UPQC in a Single-Phase Distribution System
Research Scholar, Department of Electrical and Electronics Engineering, Chaitanya (Deemed to be University), Telangana, INDIA.
Associate Professor, Department of Electrical and Electronics Engineering, Chaitanya (Deemed to be University), Telangana, INDIA.
pradeepkv56@gmail.com
kvinaykr1@gmail.com
This paper presents a control algorithm for generation of reference voltage and current based on Observerbased QSG (Quadrature Signal Generator) for UPQC (Unified Power Quality Conditioner) in a Single-Phase Distribution System. The proposed UPQC is a combination of DSTATCOM and DVR used for load and source compensation such as voltage sag and swell, voltage and current harmonics etc. The proposed control algorithm is capable of generating reference signals from the distorted voltages and currents. In this paper, an improved OQSGbased PLL (Phase-Locked Loop) is utilized over OQSG to enable and operate with increased bandwidths that will improve the dynamic response, tracking accuracy and faster detection of reference signal under all varying load and grid conditions. The control algorithm is tested and evaluated using MATLAB / Simulink.
Key words: Quadrature Signal Generator (QSG) / Observer QSG (OQSG) / Phase Locked Loop (PLL) / Power Quality (PQ) / Unified Power Quality Conditioner (UPQC)
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.