| Issue |
ITM Web Conf.
Volume 85, 2026
Intelligent Systems for a Sustainable Future (ISSF 2026)
|
|
|---|---|---|
| Article Number | 03006 | |
| Number of page(s) | 5 | |
| Section | Data Science, IoT, Optimization & Predictive Analytics | |
| DOI | https://doi.org/10.1051/itmconf/20268503006 | |
| Published online | 09 April 2026 | |
Smart Fault Detection and Alert Mechanism for Energy Storage System
1 Dept of EEE,St. Joseph’s College of Engineering Chennai, India
2 Dept of EEE, St. Joseph’s College of Engineering Chennai, India
3 Dept of EEE, St. Joseph’s College of Engineering Chennai, India
This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Abstract
Energy storage systems are really important for keeping the power supply stable. They can have a lot of problems that cause them to lose efficiency be unsafe and shut down without warning. The systems we have now need people to watch them or use methods, which are not very good and do not send warnings right away. We really need a system that can find faults and send alerts to make sure everything is reliable, safe and always working. The project we are talking about is the Smart Fault Detection and Alert Mechanism for Energy Storage Systems, which uses an Arduino Uno as the controller. This project uses sensors like a voltage sensor, current sensor and LM35 temperature sensor to keep an eye on the important battery parameters. The Arduino looks at the data. Shows it in real time on an I2C LCD display. If something is not right like if it goes beyond the limits the system uses a relay driver to protect it and a buzzer to warn people nearby. We also use a Node MCU Wi-Fi module to connect to the internet, which sends voltage, current and temperature readings to a platform so people can monitor and control it from far away. This means people can check the systems status at any time and get warnings if something goes wrong. The system we are proposing makes energy storage units more reliable, safer and more efficient which makes it really good for grids, renewable energy and industrial uses. It is, about making Energy Storage Systems better and Energy Storage Systems are very important. The Energy Storage Systems will be used in places and will make a big difference
© The Authors, published by EDP Sciences, 2026
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.