Open Access
| Issue |
ITM Web Conf.
Volume 82, 2026
International Conference on NextGen Engineering Technologies and Applications for Sustainable Development (ICNEXTS’25)
|
|
|---|---|---|
| Article Number | 01013 | |
| Number of page(s) | 6 | |
| Section | Electronics Design | |
| DOI | https://doi.org/10.1051/itmconf/20268201013 | |
| Published online | 04 February 2026 | |
- Y. Xie, L. Zhang, and C. Liu, MEMS sensors and actuators for intelligent systems: A review, Micromachines, 12, 1–25 (2021), https://doi:10.3390/mi12010057. [Google Scholar]
- S. Ji, P. Akhkandi, Y. Qi, R. Abdolvand, and H. M. Lavasani, A wide-dynamic-range (−40 °C to 180 °C) active wireless MEMS temperature sensor with 7 m°C sensitivity, IEEE Sensors Journal, 23, 9311–9319 (2023), https://doi:10.1109/JSEN.2023.3261130. [Google Scholar]
- H.N. Chamanyeta, A.M.R. Fath El-Bab, B.W. Ikua, and E. Murimi, Development of a varying multi-cantilever beam frequency up-conversion energy harvester, Energy Conversion and Management: X, 16, 100290 (2022), https://doi:10.1016/j.ecmx.2022.100290. [Google Scholar]
- Nisanth, K. J. Suja, and V. Seena, Design and optimization of MEMS piezoelectric energy harvester for low-frequency applications, Microsystem Technologies, 27, 251–261 (2021), https://doi:10.1007/s00542-020-04921-y. [Google Scholar]
- A. Nallathambi and T. Shanmuganantham, Performance analysis of cantilever-based MEMS sensor for environmental applications, in Proc. Smart Structures and Systems (ICSSS), Chennai, India, 118–122 (2014), https://doi:10.1109/ICSSS.2014.7006185. [Google Scholar]
- N. Kalaiyazhagan and T. Shanmuganantham, Performance analysis of MEMS cantilever sensor for agriculture applications, in Proc. Circuits and Systems (ICCS), Thiruvananthapuram, India, 186-190 (2017), https://doi:10.1109/ICCS1.2017.8325987. [Google Scholar]
- Ashish, N. Kumari, and T. Shanmuganantham, Design of temperature sensors for environmental applications, International Journal of Engineering Trends and Technology, 4, 4514–4518 (2013). [Google Scholar]
- P.B.S. Reddy, A.K. Sharma, and K.N. Bhat, MEMS-based humidity sensor with integrated temperature compensation, Sensors and Actuators A: Physical, 272, 290–298 (2018), https://doi:10.1016/j.sna.2018.01.051. [Google Scholar]
- L. Gao, L. Wang, and D. Li, Odysseys of agriculture sensors: Current challenges and future directions, Computers and Electronics in Agriculture, 179, 105807 (2020), https://doi:10.1016/j.compag.2020.105807. [Google Scholar]
- S. Priori, N. Mzid, S. Pascucci, S. Pignatti, and R. Casa, Performance of a portable FT-NIR MEMS spectrometer to predict soil features, Soil Systems, 6 (66), (2022), https://doi:10.3390/soilsystems6030066. [Google Scholar]
- M.A.J. Raj, R.R. Pillai, and S.C. Mukhopadhyay, IoT-enabled microfluidic colorimetric detection platform for soil macronutrients, Computers and Electronics in Agriculture, 202, 107431, (2022), https://doi:10.1016/j.compag.2022.107431. [Google Scholar]
- S.D. Calisgan et al., Micromechanical switch-based zero-power chemical detectors for plant health monitoring, Journal of Microelectromechanical Systems, 29, 755–761 (2020), https://doi:10.1109/JMEMS.2020.3002454. [Google Scholar]
- V. Belwanshi, S. Philip, and A. Topkar, Performance study of MEMS piezoresistive pressure sensors at elevated temperatures, IEEE Sensors Journal, 22, 9313–9319 (2022), https://doi:10.1109/JSEN.2022.3168404. [Google Scholar]
- Nair and A. Verma, Simulation of a cantilever beam-based soil nutrient sensor, Sensors and Transducers, 246, 32–37 (2020). [Google Scholar]
- Y. Huang et al., Real-time quantitative electromechanical characterization of nanomaterials based on integrated MEMS device, IEEE Sensors Journal, 23, 22592–22599 (2023), https://doi:10.1109/JSEN.2023.3303139. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.