| Issue |
ITM Web Conf.
Volume 28, 2019
Computer Applications in Electrical Engineering (ZkwE’2019)
|
|
|---|---|---|
| Article Number | 01040 | |
| Number of page(s) | 2 | |
| DOI | https://doi.org/10.1051/itmconf/20192801040 | |
| Published online | 15 July 2019 | |
Selection of the size of field of view in thermal imaging observations of small areas
Institute of Metrology and Optoelectronics, Poznan University of Technology, ul. Piotrowo 3A 60-965
Poznań, Poland
* Corresponding author: Krzysztof.Dziarski@put.poznan.pl
The paper explains the effect of matrix resolution on the field of view of a single detector. The dependency of the field of view of a single detector as a function of distance between the lens of thermal imaging camera and the surface observed is shown. It was proposed how to select the lens of thermal imaging camera so that the obtained thermogram it would be able to achieve such a geometric resolution that would allow for sufficiently accurate mapping of temperature distribution on the surface observed.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.