ITM Web Conf.
Volume 28, 2019Computer Applications in Electrical Engineering (ZkwE’2019)
|Number of page(s)||2|
|Published online||15 July 2019|
Thermal imaging observations of the surface of a gauge block
Institute of Metrology and Optoelectronics, Poznan University of Technology, ul. Piotrowo 3A 60-965
* Corresponding author: Krzysztof.Dziarski@put.poznan.pl
This paper proposes a method for determining the time at which the temperature of surface of a gauge block will be established. The relationship between the temperature of a gauge block, its length and the value of uncertainty of measurement when calibrating using this block was explained. Attention was paid to problems resulting from the applied measurement method. Particular attention was paid to thermal imaging observations of the lateral surface of a gauge block
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.