ITM Web Conf.
Volume 28, 2019Computer Applications in Electrical Engineering (ZkwE’2019)
|Number of page(s)||2|
|Published online||15 July 2019|
The measurement stand with DAQ card for recording a bioelectric signal from human muscles
Poznan University of Technology, Institute of Electrical Engineering and Electronics,
3A Piotrowo St.,
* Corresponding author: firstname.lastname@example.org
The measurement stand for recording a bioelectric signal from human muscles has been described in the paper. A DAQ card with a USB bus has been used in the measuring channel. The acquisition of the electromyography signal is carried out using the non-invasive method using gel electrodes. The bioelectric signal is amplified, filtered and processed in hardware and software. The tests of system operation in the measurement laboratory have been carried out. The presented results relate to the measurement of the electromyography signal from the forearm muscles of the upper limb of a human.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.