| Issue |
ITM Web Conf.
Volume 15, 2017
II International Conference of Computational Methods in Engineering Science (CMES’17)
|
|
|---|---|---|
| Article Number | 07002 | |
| Number of page(s) | 5 | |
| Section | Numerical Calculation | |
| DOI | https://doi.org/10.1051/itmconf/20171507002 | |
| Published online | 15 December 2017 | |
Dental implant stress analysis with selected prosthetic crown overhangs sizes
1 Opole University of Technology, Faculty of Mechanical Engineering, Department of Machine Technology and Production Automation, Mikołajczyka 5, 45-271 Opole, poland
2 Opole University of Technology, Faculty of Mechanical Engineering, Department of Mechanics and Machine Design, Mikołajczyka 5, 45-271 Opole, poland
* Corresponding author: a.lagoda@po.opole.pl
Dental implantology is one of burgeoning methods of teeth loss reconstruction. Because each patient is different, there are still many problems to be solved. One of them is occurrence of prosthetic crown overhangs. The overhangs increase the stress value and risk of the glue shattering, causing a crown fall out and requiring another implantologist's appointment. The aim of the study is to assess the stress value generated in the dental implant using Finite Elements Method and simplified models.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.