Quirino Estrada, Dariusz Szwedowicz, Alejandro Rodriguez-Mendez, Jesús Silva-Aceves, Javier S. Castro, Lara C. Wiebe, Elifalet Gonzalez, Julio Vergara-Vazquez and Andrea E. Chavez

Published online: 15 December 2017

DOI: https://doi.org/10.1051/itmconf/20171507009

Open Access

Open-end tube dynamic flow model with an oscillatory extortion 07010

Tytus Tulwin, Monika Klimek and Piotr Piech

Published online: 15 December 2017

DOI: https://doi.org/10.1051/itmconf/20171507010

Open Access

Optimisation of liquid flow in cavitation tunnel using CFD method 07011

Robert Jasionowski and Waldemar Kostrzewa

Published online: 15 December 2017

DOI: https://doi.org/10.1051/itmconf/20171507011

Open Access

Selection of appropriate concrete model in numerical calculation 07012

Krzysztof Śledziewski

Published online: 15 December 2017

DOI: https://doi.org/10.1051/itmconf/20171507012

Open Access

Stability of rectangular plates with notch using FEM 07013

Katarzyna Falkowicz

Published online: 15 December 2017

DOI: https://doi.org/10.1051/itmconf/20171507013

Open Access

The analysis of distributions of effective strain and flow stress in longitudinal sections of cold backward extruded copper cans for different punch-face shapes 07014

Tomasz Miłek

Published online: 15 December 2017

DOI: https://doi.org/10.1051/itmconf/20171507014

Open Access

The design and structural analysis of the endoprosthesis of the shoulder joint 07015

Robert Karpiński, Łukasz Jaworski and Jarosław Zubrzycki

Published online: 15 December 2017

DOI: https://doi.org/10.1051/itmconf/20171507015

Open Access

The dual-fuel CFD combustion model with direct and indirect CNG injection 07016

Tytus Tulwin and Rafał Sochaczewski

Published online: 15 December 2017

DOI: https://doi.org/10.1051/itmconf/20171507016

ITM Web of Conferences

Volume 15 (2017)

II International Conference of Computational Methods in Engineering Science (CMES’17)

Statement of Peer review

About the Conference

Application Of Computer Programs In Technology

An inexpensive environmental monitoring system with IoT agents 01001

Decomposition of business process models into reusable sub-diagrams 01002

Identification, characterisation, and correction of artefacts in electroencephalographic data in study of stationary and mobile electroencephalograph 01003

Modification of Adaptive Huffman Coding for use in encoding large alphabets 01004

Optimisation of milling parameters using neural network 01005

Repeatability of the three dimensional kinematics of the pelvis, spine and lower limbs while performing selected exercises 01006

Segmentation and reconstruction of the 3D geometry of the middle and inner ear 01007

Computational And Artificial Intelligence

Artificial neural network modelling of cutting force components in milling 02001

Classification of user performance in the Ruff Figural Fluency Test based on eye-tracking features 02002

Classifier testing for the brain-machine interface (BCI) based on Steady State Visually Evoked Potential (SSVEP) 02003

Kohonen network as a classifier of Polish emotional speech 02004

Prediction of monthly electric energy consumption using pattern-based fuzzy nearest neighbour regression 02005

Reliability and cost optimisation of complex electric power networks using ant colony algorithm 02006

Using methods of the reverse engineering to carry personalised preoperative stabilisers out on the example of vertebrae of human spine 02007

Virtual road concept as a tool for road quality research 02008

Web service for solving optimisation problems using swarm intelligence algorithms 02009

Computer Simulations Of Processes And Phenomena

An investigation into multi-domain simulation for a pantographcatenary system 03001

Charging process analysis of an opposed-piston two-stroke aircraft Diesel engine 03002

Comparison of macroscopic descriptions of magnetization curves 03003

Modelling of the temperature field that accompanies friction stir welding 03004

Stochastic higher order finite element elasto-plastic analysis of the necking phenomenon 03005

The assessment of water loss from a damaged distribution pipe using the FEFLOW software 03006

The modelling of condensation in horizontal tubes and the comparison with experimental data 03007

The modelling of two DOF joints controlled by elastic inner ties 03008

The optimisation of a water distribution system using Bentley WaterGEMS software 03009

Evaluation Of Technological Processes

Application of neural networks in CRM systems 04001

Calculation of the number of branches of multi-valued decision trees in computer aided importance rank of parameters 04002

Cluster analysis to evaluate chemical compounds in the waters of piezometers from a drilling wastes landfill 04003

Computer modelling of the influences of a subsystems’ interaction on energetic efficiency of biofuel production systems 04004

Estimation of uncertainty of laser interferometer measurement in industrial robot accuracy tests 04005

Experimental investigation of the degree of weakening in structural notch area of 7075-T6 aluminum alloy sheet welded with the RFSSW method 04006

IT solutions supporting project management processes and the choice of software 04007

Milling gate vibrations analysis via Hilbert-Huang transform 04008

Scalability conditions of the measuring points network in a production system using the RFID selective gate technology 04009

Selected aspects of the technological processes of the aircraft engine washing 04010

Supporting the climate of innovation in the SME sector - an application for SMEs 04011

The effects of welding parameters on the tensile shear strength of refill friction stir spot welding of 7075-T6 aluminium alloy joints 04012

Uncertainty measurement with the kinematic telescopic bar during industrial robot inaccuracy tests 04013

Exploitation And Machine Building

An attempt to use FMEA method for an approximate reliability assessment of machinery 05001

Analysis of a planetary gear modelled with a contour graph considering the decision making complexity of game-tree structures 05002

Assessing the damage importance rank in acoustic diagnostics of technical conditions of the internal combustion engine with multi-valued logical decision trees 05003

Calculating an electromechanical torque of a squirrel cage motor based on an axial flux obtained by the FEM 05004

Chamber stapes prosthesis with an improved fastening of the membrane 05005

Control and data acquisition system for rotary compressor 05006

Description of anisotropy of magnetic properties for chosen grades of electrical steels 05007

Digital signal processing in ultrasonic based navigation system for mobile robots 05008

Implementation of PID autotuning procedure in PLC controller 05009

Indoor mobile robot attitude estimation with MEMS gyroscope 05010

Measurement system analysis for one-sided tolerance 05011

Modelling and simulation of a hydraulic active heave compensation system 05012

Recurrence analysis of regular and chaotic motions of a superelastic shape memory oscillator 05013

Material Properties And Structure Research Methods

An experimental study of exploitation of materials used for prosthetic temporary restorations 06001

Analysis of fracture roughness parameters of S355J2 steel and EN AW-2017A-T4 aluminium alloy 06002

Application of computer image analysis software for determining incubation period of cavitation erosion – preliminary results 06003

Computational image analysis of Suspension Plasma Sprayed YSZ coatings 06004

Effect of porosity on physical properties of lightweight cement composite with foamed glass aggregate 06005

Evaluation of scratch resistance of nitride coatings on Ti grade 2 06006

Experimental and numerical assessment of the characteristics describing superelasticity in shape memory alloys – influence of boundary conditions 06007

Structure and tribological properties of MoS2 low friction thin films 06008

The tensile strength test of thermoplastic materials based on poly(butylene terephtalate) 06009

Numerical Calculation

Analysis of dynamic stiffness of arch bridges by means of the first natural frequency 07001

Dental implant stress analysis with selected prosthetic crown overhangs sizes 07002

Dynamic diagnostics of moving ferromagnetic material with the linear induction motor 07003

FEM simulation research of natural frequency vibration of crankshaft from internal combustion engine 07004

Influence of gas inlet angle on the mixing process in a Venturi mixer 07005

Influence of patient position and implant material on the stress distribution in an artificial intervertebral disc of the lumbar vertebrae 07006

Numerical analyses of adhesive-bonded joints in steel I-beams reinforced with CFRP strips 07007

Numerical analysis of the influence of particular autogyro parts on the aerodynamic forces 07008

Structure and tribological properties of MoS₂ low friction thin films 06008