Open Access
Issue
ITM Web Conf.
Volume 15, 2017
II International Conference of Computational Methods in Engineering Science (CMES’17)
Article Number 07014
Number of page(s) 7
Section Numerical Calculation
DOI https://doi.org/10.1051/itmconf/20171507014
Published online 15 December 2017
  1. V. Shatermashhadi, B. Manafi, K. Abrinia, G. Faraji, M. Sanei, Mater. Des. 62, 361 (2014). [CrossRef] [Google Scholar]
  2. K. Lange, Handbook of metal forming (McGraw-Hill, Inc. USA, 1985). [Google Scholar]
  3. W. A. Golowin, A. N. Mitkin, A. G. Rieznikow, Cold extrusion of metals (WNT Warszawa, 1975). [Google Scholar]
  4. S.H. Kim, S.W. Chung, S. Padmanaban, J. Mater. Process. Technol. 180, 185 (2006). [CrossRef] [Google Scholar]
  5. A. Farhoumand, R. Ebrahimi, Mater. Des. 30, 2152 (2009). [CrossRef] [Google Scholar]
  6. M. Plancak, M. Brameley, A. Osman F. J. Mater. Process. Technol. 34, 465 (1992). [CrossRef] [Google Scholar]
  7. S.H. Hosseini, K. Abrinia, G. Faraji, Mater. Des. 65, 521 (2015). [CrossRef] [Google Scholar]
  8. K. Kuczyński, E. Erbel, Metal forming – lab (Wyd. Polit. Warszaw., Poland, 1984). [Google Scholar]
  9. R.S. Lee, C.T. Kwan, J. Mater. Process. Technol. 59, 351 (1996). [CrossRef] [Google Scholar]
  10. J. Zasadziński, Rudy i Met. Nieżelazne 47, 26 (2002). [Google Scholar]
  11. Y.H. Kim, J.H. Park, J. Mater. Process. Technol. 143-144, 735 (2003). [CrossRef] [Google Scholar]
  12. P. Thomas, Maint. Reliab. 2, 63 (2003). [Google Scholar]
  13. A. Żmudzki, R. Kuziak, M. Papaj, M. Pietrzyk, Obr. Plast. Met. 3, 69 (2004). [Google Scholar]
  14. L. Wang, J. Zhou, J. Duszczyk, L. Katgerman, Tribol. Int. 56, 89 (2012). [CrossRef] [Google Scholar]
  15. Ch. Chang, J. Lin, Ch.-P. Siao, Steel Res. Int., spec. edit.: 14th Int. Conf. Met. Form. 467 (2012). [Google Scholar]
  16. M. Wang, Y. Zhang, D. Huang, X. Liu, Trans. Nonferrous Met. Soc. China 17, 449 (2007). [CrossRef] [Google Scholar]
  17. S. Geisdorfer, A. Rosochowski, L. Olejnik, U. Engel, M. Richert, Int. J. Mater. Form. 1, 455 (2008). [CrossRef] [Google Scholar]
  18. W. Chan, M. W. Fu, B. Yang, Mater. Des. 32, 3772 (2011). [CrossRef] [Google Scholar]
  19. B. Bazaz, A. Zarei-Hanzaki, S. Fatemi-Varzaneh, Material Science and Engineering A 559, 595 (2013). [CrossRef] [Google Scholar]
  20. L. Yi, Y. Dong, M. Lin, L. Zhang, X. Wang, 2013 Int. Conf. on QR2MSE, 1181 (2013). [Google Scholar]
  21. T. Miłek, B. Kowalik, B. Kuliński, Arch. Metall. Mater. 4, 3043 (2015). [Google Scholar]
  22. N. Biba, S. Stebunov, A. Vlasov, Steel Res. Int. 79, 611 (2008). [Google Scholar]
  23. T. Miłek, Mechanik 5/6, 536 (2016). [Google Scholar]
  24. T. Miłek, Int. Conf. Metal 2014, 285 (2014). [Google Scholar]
  25. QFORM 2D/3D Metal forming simulation program ver. 4.2. 2D simulation (User’s Guide, QuantorForm Ltd. 2007). [Google Scholar]
  26. A. Mazurkiewicz, L. Kocur, Metal forming – laboratory (Wyd. Polit. Radom. 2001). [Google Scholar]
  27. W. Muzykiewicz, A. Rękas, Rudy i Met. Nieżelazne 49/10-11, 542 (2004). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.