| Issue |
ITM Web Conf.
Volume 15, 2017
II International Conference of Computational Methods in Engineering Science (CMES’17)
|
|
|---|---|---|
| Article Number | 07013 | |
| Number of page(s) | 4 | |
| Section | Numerical Calculation | |
| DOI | https://doi.org/10.1051/itmconf/20171507013 | |
| Published online | 15 December 2017 | |
Stability of rectangular plates with notch using FEM
Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, poland
* Corresponding author: k.falkowicz@pollub.pl
Buckling behaviour analysis of thin-walled composite plate under an axial compressive force is presented. The plate with central notch is made of a carbon-epoxy composite – a laminate consisting of eight symmetrically oriented plies. This paper addresses an influence of notch on buckling behaviour of laminated composite plates. In this analysis, FEM was applied to perform parametric studies on various plates based on stacking sequences, shape of notch, and its size. Buckling behaviour of laminated composite plates under an axial compression load is studied using ABAQUSS software.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.