Open Access
Issue
ITM Web Conf.
Volume 15, 2017
II International Conference of Computational Methods in Engineering Science (CMES’17)
Article Number 04006
Number of page(s) 5
Section Evaluation Of Technological Processes
DOI https://doi.org/10.1051/itmconf/20171504006
Published online 15 December 2017
  1. M. A. Sutton, B. Yang, A. P. Reynolds, R. Taylor, Mater. Sci. Eng. A 323, (2002) [CrossRef] [Google Scholar]
  2. S. Zhikang, Y. Xinqi, Z. Zhaohua, C. Lei, L. Tielong, Mater. Des. 44,(2013) [Google Scholar]
  3. Y. Q. Zhao, H. J. Liu, Z. Lin, S. X. Chen, J. C. Hou, Sci. Technol. Weld. Joi. 19, (2014) [Google Scholar]
  4. T. Dursun, C. Soutis, Mater. Des. 56, (2014) [CrossRef] [Google Scholar]
  5. P. Briskham, N. Blundell, L. Han, R. Hewitt, K. Young. SAE Technical Paper, (2006) [Google Scholar]
  6. W. Zielecki, A. Kubit, T. Trzepieciński, U. Narkiewicz, Z. Czech. Int. J. Adhes. Adhes. 73, (2017). [Google Scholar]
  7. W. Zielecki, A. Kubit, R. Kluz, T. Trzepieciński. J. Adhes. Sci. Techn. 31, (2016). [Google Scholar]
  8. C. Shilling, J. D. Santos, Method and device for joining at least two adjoining work pieces by friction welding: Patent Application No. US0179682,(2002) [Google Scholar]
  9. S. Venukumar, S. Yalagi, S. Muthukumaran, Trans. Nonferrous Met. Soc. 23, (2013) [CrossRef] [Google Scholar]
  10. N. Pathak, K. Bandyopadhyay, M. Sarangi, S.K Panda, J. Mater. Eng. Perform. 22, (2013) [CrossRef] [Google Scholar]
  11. Y. Uematsu, K. Tokaji, Sci. Technol. Weld. Joi. 14, (2009) [CrossRef] [Google Scholar]
  12. D. H. Choi, B. W. Ahn, C. Y. Lee, Y. M. Yeon, K. U. Song, S. B. Jung, Mater. Trans. 51, (2010) [Google Scholar]
  13. Y.Q. Zhao, H.J Liu, S.X. Chen, Z. Lin, J.C. Hou. Mater. Des. 62, (2014) [Google Scholar]
  14. R. Kluz, A. Kubit, D. Wydrzyński,Technol. Assembly Automat. 2, (2017) [Google Scholar]
  15. L. Zhengwei, G. Shuangsheng, J. Shude, Y. Yumei, C. Peng Chai, J. Mater. Eng. Perform. 25, (2016) [Google Scholar]
  16. A. Kubit, R. Kluz, T. Trzepieciński, D. Wydrzyński, W. Bochnowski, Arch. Civil Mech. Eng. 18, (2018) [CrossRef] [Google Scholar]
  17. American Society for Testing and Materials (ASTM). Standard practice for microetching metals and alloys. West Conshohocken: ASTM International (2007). Standard no. E407. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.