Open Access
| Issue |
ITM Web Conf.
Volume 15, 2017
II International Conference of Computational Methods in Engineering Science (CMES’17)
|
|
|---|---|---|
| Article Number | 05011 | |
| Number of page(s) | 6 | |
| Section | Exploitation And Machine Building | |
| DOI | https://doi.org/10.1051/itmconf/20171505011 | |
| Published online | 15 December 2017 | |
- B. Colismo, N. Senon, Geometric Tolerances (2011) [CrossRef] [Google Scholar]
- AIAG, Statistical Process Control (SPC) 2nd Edition (2005) [Google Scholar]
- T. M. Yeh, J. J. Sun,J Appl. Res. Technol. 11, 780-786 (2013) [CrossRef] [Google Scholar]
- AIAG, Measurement Systems Analysis (MSA) 4th Edition (2010) [Google Scholar]
- M. J. Flynn, IEEE Trans. Intrum. Meas. Mag. 11, 10-15 (2008) [Google Scholar]
- VDA, VDA volume 5 Capability of Measurement Process (2011) [Google Scholar]
- International Organization for Standardization,PN-EN ISO 14253-2: 2011: Specyfikacje geometrii wyrobów (GPS) -- Kontrola wyrobów i wyposażenia pomiarowego za pomocą pomiarów -- Część 2, 9 (2011) [Google Scholar]
- N. Ridler, B. Lee, J. Martens, K. Wong, IEE Microw. Mag. 8, 44-53 (2007) [CrossRef] [Google Scholar]
- JCGM, Evaluation of measurement data — Guide to the expression of uncertainty in measurement, 5 (2008) [Google Scholar]
- AIAG, Measurement Systems Analysis (MSA) 4th Edition, 13 (2010) [Google Scholar]
- A M. Awad, T. P. Erdmann, Y. Shanshal, B. Barth, Qual. Eng. 21, 300-305 (2009) [CrossRef] [Google Scholar]
- AIAG, Measurement Systems Analysis (MSA) 4th Edition, 214 (2010) [Google Scholar]
- http://support.minitab.com/en-us/minitab/17/topic-library/quality-tools/measurement-system-analysis/gage-r-r-analyses/calculation-of-percent-tolerance-with-a-one-sided-tolerance/ [Google Scholar]
- C J. N. Pan, Qual. Quant. 40, 499-518 (2006) [CrossRef] [Google Scholar]
- International Organization for Standardization, PN-EN ISO 14253-1: 2014-02: Specyfikacje geometrii wyrobów (GPS) -- Kontrola wyrobów i wyposażenia pomiarowego za pomocą pomiarów -- Część 1: Reguły orzekania zgodności lub niezgodności ze specyfikacją (2014) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.