ITM Web Conf.
Volume 17, 20184th Annual International Conference on Wireless Communication and Sensor Network (WCSN 2017)
|Number of page(s)||7|
|Section||Session 1: Wireless Communication|
|Published online||02 February 2018|
Research on Outfitting Virtual Assembly based on Ergonomics
Department of Industrial Engineering and Management, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, PR China
2 Research Institute of shipbuilding technology, Shanghai Waigaoqiao Shipbuilding Co. Ltd., 3001 Zhouhai Road, Shanghai 200137, PR China
* Corresponding author: Zhjiang@sjtu.edu.cn
To improve the present situation where the assembly work of ship outfitting depends on manual experiential operation, the thesis, taking outfitting assembly operation as the research object and optimal assembly path as the target, puts forward the simulation method and procedure of outfitting virtual assembly considering operational posture, operational load, reachability and visibility and other ergonomic factors, taking pipe assembly operation of ship section as the application example. The results show that the method can obtain better assembly operation path, avoid interference of workers’ operation process and improve the efficiency of assembly operation.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.