ITM Web Conf.
Volume 19, 2018Computer Applications in Electrical Engineering (ZKwE’2018)
|Number of page(s)||2|
|Published online||21 September 2018|
Use of cross-compiling in the programming of an intelligent device for measuring electrical quantities
Faculty of Mechanical Engineering and Management, Poznań University of Technology, 60-965 Poznań, ul. Piotrowo 3, Poland
2 Faculty of Electrical Engineering, Poznań University of Technology 60-965 Poznań, ul. Piotrowo 3A, Poland
Corresponding author: email@example.com
A device for voltage and direct current measurement, built by coupling a Raspberry Pi microcomputer with an Arduino series microcontroller is presented in this paper. The structure of the device is presented and the method of implementing proprietary programs for both devices is described. A touch screen of the device allows the user to decide on the measurement mode (automatic or manual) and on the method of archiving and visualizing the effects of measurements. The application uses the so-called cross-compiling, thanks to which it is possible to effectively couple such different platforms as Raspberry Pi and Arduino.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.