| Issue |
ITM Web Conf.
Volume 23, 2018
XLVIII Seminar of Applied Mathematics
|
|
|---|---|---|
| Article Number | 00007 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/itmconf/20182300007 | |
| Published online | 07 November 2018 | |
Model-based electrospinning process design for nanofibers production
Wrocław University of Science and Technology, Department of Control Systems and Mechatronics, Wrocław, Poland
* Corresponding authors: marlena.kwiatkowska@pwr.edu.pl, pawel.drag@pwr.edu.pl
The main concept of the electrospinning process modeling is to overcome difficulties associated with the experimental-based optimization procedure. Thus, 3-dimensional polynomial models were discussed in this work. Electrospinning process modeling is an approach that supplies the information about wanted concentrations of the electrospinning solution components and will also make it possible to obtain bead-free nonwovens with desired fiber diameter. The application area for described methodology is highly associated with the environmental field of study, where the design of the functionalized nanofibers production is extremely requested (e.g. separation, filtration and purification processes).
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.