ITM Web Conf.
Volume 28, 2019Computer Applications in Electrical Engineering (ZkwE’2019)
|Number of page(s)||2|
|Published online||15 July 2019|
Project of a universal inverter used to control and supply both AC and DC electric motors
1,2,3Poznan University of Technology, Institute of Industrial Electrical Engineering,
* Corresponding author: email@example.com
The paper presents the new approach for motor driver constructions and control systems. Authors of the work proposed the device that can control both AC and DC electric motors without any additional hardware modification. In order to meet this goal the universal motor driver has been constructed and some improvements in output waveform modulation system have been introduced. In the paper the three different method of a motor control have been discussed briefly and a hardware setup has been presented. Tests have been carried out for three types of electric motors, i.e. a magnetoelectric DC motor, single-phase and three-phase induction motor. The obtained results in form of output waveforms of current and voltage have been analyzed in terms of harmonic distortion using a popular Fast Fourier Transform FFT and discussed in the paper.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.