| Issue |
ITM Web Conf.
Volume 28, 2019
Computer Applications in Electrical Engineering (ZkwE’2019)
|
|
|---|---|---|
| Article Number | 01030 | |
| Number of page(s) | 2 | |
| DOI | https://doi.org/10.1051/itmconf/20192801030 | |
| Published online | 15 July 2019 | |
The influence of the presence of gasses in mineral oil on the ability of molecular sieves for water sorption
Poznan University of Technology, Institute of Electric Power Engineering, Piotrowo 3A,
60-965
Poznan, Poland
Previous studies has shown, that for the same relative humidity, the ability of molecular sieves to adsorb water in the air is higher than in mineral oil. One of the reasons for this difference may be the presence of dissolved gasses in the mineral oil. The effect of the presence of gasses in mineral oil on the ability of molecular sieves to adsorb water was experimentally investigated. Samples of non-degassed and degassed mineral oil with a similar initial water content were dried by means of activated 3A and 13X molecular sieves. The obtained results allowed to show that in the studied range of gas content in oil they do not affect the ability of molecular sieves for water sorption.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.