ITM Web Conf.
Volume 30, 201929th International Crimean Conference “Microwave & Telecommunication Technology” (CriMiCo’2019)
|Number of page(s)||5|
|Section||Materials and Technology of Microwave Devices (5a)|
|Published online||27 November 2019|
Novgorod State University, 173003, Veliky Novgorod, Russia
* Corresponding author: Sergey.Ivanov@novsu.ru
The results of the magnetoelectric effect study in the magnetopiezofiber are presented. Magnetopiezofiber consists of mechanically coupled piezoelectric (one layer of lead zirconate titanate) and magnetostrictive (two metglass layers) fibers. The layers were joined together by epoxy under pressure and heating. The sample active area dimensions were 28x7x0,34 mm. The study of the magnetoelectric effect was carried out in the frequency range from 0 to 150 kHz and external magnetic field range from 0 to 100 Oe. Maximum value of the ME voltage coefficient αE = 62,75 V/cm-Oe was measured on the electromechanical resonance frequency f = 61 kHz with an external magnetic field of 4,5 Oe. Obtained results indicate the prospects of the proposed design in magnetoelectric devices application.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.