| Issue |
ITM Web Conf.
Volume 32, 2020
International Conference on Automation, Computing and Communication 2020 (ICACC-2020)
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 5 | |
| Section | Automation | |
| DOI | https://doi.org/10.1051/itmconf/20203201001 | |
| Published online | 29 July 2020 | |
Rubble Assistant Robot using SLAM
Department of Electronics Engineering, Ramrao Adik Institute Of Technology, Nerul, Navi Mumbai, India
* e-mail: priyalpatil98@gmail.com
** e-mail: jayraj.pol@gmail.com
*** e-mail: roy.amarkant@gmail.com
**** e-mail: profsjpetkar@gmail.com
In this paper, we are going to present an implementation of SLAM. This SLAM technology is used for creating a map of an unknown environment by placing a robot. Robot will be interfaced and controlled using Robot Operating System (ROS). We are aiming to create a map of a region where disaster has taken place. It can be used to create a map of the regions where humans cannot reach. In the disaster prone areas it is not possible for humans to check the location of survivors. Our robot will help to amplify low human noise to detect presence of humans under the rubble and to detect them using sensors and then we can mark that location so that rescue team would quickly reach to that location for their rescue, also simultaneous live feed/streaming using normal camera to monitor the area. Here main part is odometry of robot. To calculate odometry, camera and encoders are used. So, SLAM based robots can help in mapping their locations digitally.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.