| Issue |
ITM Web Conf.
Volume 35, 2020
International Forum “IT-Technologies for Engineering Education: New Trends and Implementing Experience” (ITEE-2019)
|
|
|---|---|---|
| Article Number | 01007 | |
| Number of page(s) | 15 | |
| Section | Engineering Education Technology Based on Using Digital Resources | |
| DOI | https://doi.org/10.1051/itmconf/20203501007 | |
| Published online | 09 December 2020 | |
Creating E-Courses for Learning the CAD Basics
Bauman Moscow State Technical University, 2nd Baumanskaya str., 5/1, 105005, Moscow, Russia.
* Corresponding author: novitskiybronislav@bmstu.ru
Article is devoted to the peculiarities of creating an electronic course on learning the basics of three-dimensional design of wind power plant elements using modern software systems. The iSpring Suite program was chosen as a course development tool. It has support for the SCORM 2004 format and extensive integration with office suites. In order to minimize problems with working in various distance learning systems, the course was divided into nine modules. The first module is dedicated to the basics of wind energy. The second module provides an overview of existing CAD programs. The third and fourth modules are dedicated to 2dimensional design. The fifth and sixth modules introduce commands for creating 3-dimensional parts from both other parts and 2-dimensional sketches. Module 7 is devoted to algorithms for creating assemblies from existing 3-dimensional parts. Module 8 and 9 represent the implementation of the multiplier/reducer Assembly algorithm from ready-made 3dimensional parts that are present in the course resources.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.