ITM Web Conf.
Volume 48, 2022The 4th International Conference on Computing and Wireless Communication Systems (ICCWCS 2022)
|Number of page(s)||5|
|Section||Antennas & Propagation|
|Published online||02 September 2022|
RFID System for Respiratory Rate Monitoring
Post-Graduation Program in Electrical Engineering, Federal University of Campina Grande, Campina Grande, Brazil
* Jéssyca Iasmyn Lucena Araujo: email@example.com
In this work, an RFID system was developed to monitor the respiratory rate. This monitoring was based on variations in the Received Signal Strength Indicator (RSSI) by the reader due to respiratory movements. In some breath measurement configurations, the maximum read range was greater than 1 m, which is the distance considered in the measurement configurations described in some scientific papers. The RSSI data, obtained by reading the RFID tag, were processed using the Daubechies wavelet of order 3 (db3) and considering three levels of signal decomposition. Less noisy breathing signals were obtained in the measurements with the participant seated and the RFID tag with the polyethylene foam on the abdomen. The respiratory frequencies acquired from the variations of the RSSI parameter were validated by comparison with the results obtained using a vital signals monitor.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.