Issue |
ITM Web Conf.
Volume 57, 2023
Fifth International Conference on Advances in Electrical and Computer Technologies 2023 (ICAECT 2023)
|
|
---|---|---|
Article Number | 01013 | |
Number of page(s) | 10 | |
Section | Software Engineering & Information Technology | |
DOI | https://doi.org/10.1051/itmconf/20235701013 | |
Published online | 10 November 2023 |
Prediction of Burr Formation in End Micro Milling Poly methyl Methacrylate (PMMA) and Polycarbonate (PC) Substrates Using Convolutional Neural Network (CNN)
1 Department of Computer Science and Engineering Chandigarh University Gharuan, Punjab
2 Department of Computer Science and Engineering Chandigarh University Gharuan, Punjab
Polymer microfluidic device is growing in the fields of disease detection, drug synthesis, and environmental monitoring because of the benefits of the miniaturized platforms that provides rapid high-throughput analysis at small sample volumes. A machining technique called micro milling is employed in the manufacture of micro components (micro fluidic devices) such as poly methyl methacrylate (PMMA) or polycarbonate (PC). Micro milling has the advantage of being a quicker, more affordable, and more effective method for fabricating more complex structures. PMMA has been used as the substrate in this study for micro milling followed by factor analysis. This aim of this study is to understand the influence of each micro milling parameter to the surface quality. This paper includes 450 microscopic images of the micro-milling substrate by different parameters like spindle speed, depth of cut and Surface quality. The microscopic images are divided to test, train and Val dataset, using three datasets and a Convolutional Neural Network (CNN) is designed.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.