ITM Web Conf.
Volume 22, 2018The Third International Conference on Computational Mathematics and Engineering Sciences (CMES2018)
|Number of page(s)||11|
|Published online||17 October 2018|
- Togun H, Abdulrazzaq T, Kazi SN, Badarudin A, Kadhum AAH, Sadeghinezhad E. A review of studies on forced, natural and mixed heat transfer to fluid and nano fluid flow in an annular passage 2014;39:835-56. [Google Scholar]
- Tobergte DR, Curtis S. Summary for Policymakers. In: Intergovernmental Panel on Climate Change, editor. Clim. Chang. 2013-Phys. Sci. Basis, vol. 53, Cambridge: Cambridge University Press; 2013, p. 1-30. [Google Scholar]
- Manglik RM, Fang PP. Effect of eccentricity and thermal boundary conditions on laminar fully developed flow in annular ducts. Int J Heat Fluid Flow 1995;16:298-306. doi: 10.1016/0142-727X(95)00030-T. [CrossRef] [Google Scholar]
- Matin MH, Pop I, Khanchezar S. Journal of Non-Newtonian Fluid Mechanics Natural convection of power-law fluid between two-square eccentric duct annuli. J Nonnewton-Fluid Mech 2013; 197:11-23. [CrossRef] [Google Scholar]
- Arefmanesh A, Amini M, Mahmoodi M, Najafi M. European Journal of Mechanics B / Fluids Buoyancy-driven heat transfer analysis in two-square duct annuli filled with a nanofluid. Eur JMech B/Fluids 2012;33:95-104. [CrossRef] [MathSciNet] [Google Scholar]
- El-maghlany WM, Sorour MM, Hozien O. Experimental study of natural convection in an annulus between two eccentric horizontal square ducts 2015;65:65-72. [Google Scholar]
- Ciampi M, Faggiani S, Grassi W, Tuoni G, Incropera FP. Mixed convection heat transfer in horizontal, concentric annuli for transitional flow conditions. Int J Heat Mass Transf 1987;30:833-41. [CrossRef] [Google Scholar]
- Studies AM. M i x e d c o n v e c t i o n f l o w of a Bi plastic in an e c c e n t r i c annulus 1994;15:132-41. [Google Scholar]
- Appl M, Engrg M. Generalized formulation for estimating pressure drop in fully-developed laminar flow in singly and doubly connected channels of non-circular. Comput Methods Appl Mech Eng 2013;259:64-76. [CrossRef] [Google Scholar]
- Monteiro ER, Macêdo EN, Quaresma JNN, Cotta RM. International Journal of Heat and Mass Transfer Laminar flow and convective heat transfer of non-Newtonian fluids in doubly connected ducts. Int J Heat Mass Transf 2010;53:2434-48. [CrossRef] [Google Scholar]
- Anjum I, Al-rashed AAAA, Ahmed NJS, Kamangar S, Jeevan K. International Journal of Heat and Mass Transfer Natural convection in a square porous annulus. Int J Heat Mass Transf 2012;55:7175-87. [CrossRef] [Google Scholar]
- Mahmoodi M, Mazrouei S. Superlattices and Microstructures Natural convection in a square cavity containing a nanofluid and an adiabatic square block at the center. Superlattices Microstruct 2012;52:261-75. [CrossRef] [Google Scholar]
- Gavara M, Kanna PR. Study of conjugate natural convection between vertical coaxial rectangular cylinders. Int Commun Heat Mass Transf 2012;39:904-12. [CrossRef] [Google Scholar]
- Xing D, Yan C, Wang C, Sun L. Progress in Nuclear Energy A theoretical analysis about the effect of aspect ratio on single-phase laminar fl ow in rectangular ducts. Prog Nucl Energy 2013;65:1-7. [CrossRef] [Google Scholar]
- Irvine TF, Hartnett JP. Edited by FORCED CONVECTION. n.d. shah and london. [Google Scholar]
- H. K. Versteeg and W. Malalasekera, “Introduction to computational fluid dynamics-Finite Volume Method” 1995. [Google Scholar]
- ANSYS, Inc., “Fluent Theory Guide”. [Google Scholar]
- Wibulswas, P. Laminar-flow heat-transfer in non-circular ducts (Doctoral dissertation, University of London). [Google Scholar]
- R. F. Bartlett, Raymond Viskanta. Enhancement of Forced Convection in an Asymmetrically Heated Duct Filled with High Thermal Conductivity Porous Media [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.