Open Access
Issue
ITM Web Conf.
Volume 47, 2022
2022 2nd International Conference on Computer, Communication, Control, Automation and Robotics (CCCAR2022)
Article Number 03002
Number of page(s) 10
Section Control Technology and Robotics Technology
DOI https://doi.org/10.1051/itmconf/20224703002
Published online 23 June 2022
  1. http://www.2018-cirp-cats.com [Google Scholar]
  2. Li M, Wang L, Yu G, et al. A new calibration method for hybrid machine tools using virtual tool center point position constraint[J]. Measurement, 2021, 181(7):109582. [CrossRef] [Google Scholar]
  3. Chang-He L I, Cai G Q. Development and research status of parallel machine tool[J]. Journal of Qingdao Technological University, 2008. [Google Scholar]
  4. Ma W, Jin X, Yu J, et al. Oppositely oriented series multiple tuned mass dampers and application on a parallel machine tool[J]. Mechanical Systems and Signal Processing, 2022, 163:108196. [CrossRef] [Google Scholar]
  5. Yue Su Ping, Liu Dezhong, Li Shiliang. 7 DOF virtual axis string parallel machine concept design [J]. Journal of North China Institute of Technology, 2004,25 (4): 239-242 [Google Scholar]
  6. HE Xiao-mei, DING Hong-sheng, FU Tie, et al. Study on Kinematic Calibration of Parallel Machine Tool [J]. Machine Tool & Hydraulics, 2004,10: 9-11 [Google Scholar]
  7. Hai Wang, Kuang-Chao Fan. Identification of strut and assembly errors of a 3-PRS serial-parallel machine tool[J].International Journal of Machine Tools & Manufacture,2004,44:1171-1178 [CrossRef] [Google Scholar]
  8. YAO Rui,ZHU Wenbai,HUANG Peng.Accuracy Analysis of Stewart Platform Based on Interval Analysis Method[J].Chinese Journal of Mechanical Engineering,2013,26(01):29-34. [CrossRef] [Google Scholar]
  9. A.J. Patel,K.F. Ehmann.Volumetric error analysis of a stewart platform-based machine tool[J]. Annals of the CIRP,2015,46:287-290 [Google Scholar]
  10. Lewis F L, Tim W K, Wang L Z, et al. Deadzone compensation in motion control systems using adaptive fuzzy logic control[J]. Control Systems Technology IEEE Transactions on, 2015, 7(6):731-742. [Google Scholar]
  11. Zhou Hongbin, Zhang Jianmin, Fu Hongwei, Li Shaoling. Research on Error Compensation Technology of Workpiece for PRS - XY Hybrid NC Machine Tool. Journal of Beijing Institute of Technology, 2007,1 [Google Scholar]
  12. Jorge S, Majarena A C, David S, et al. Articulated Arm Coordinate Measuring Machine Calibration by Laser Tracker Multilateration[J]. The Scientific World Journal,2014,(2014-1-29), 2014, 2014:681853. [Google Scholar]
  13. Okada M. Laser gas analyzer: US, US20120212744 A1[P]. 2013. [Google Scholar]
  14. Hai Wang,Kuang-Chao Fan.Identification of strut and assembly errors of a 3-PRS serial-parallel machine tool[J].International Journal of Machine Tools & Manufacture,2004,44:1171-1178 [CrossRef] [Google Scholar]
  15. F Ebara. Method for calibrating parameter of articulated coordinate measuring apparatus: US, US8468869 B2[P]. 2013. [Google Scholar]
  16. H Ota,TShibukawa, T Tooyama et al. Forward kinematic aalibration and gravity compensation for parallel-mechanism-based machine tools[A]. Proceeding of Institution of Mechanical Engineering,vol 216 Part K:J Multi-body Dynamics[C],2002:39-49 [CrossRef] [Google Scholar]
  17. Niu Z G, Li Z, Deng Y J. Principle and Experiment of PRS-XY Hybrid NC Machine Tool[C]//Key Engineering Materials. Trans Tech Publications Ltd, 2009, 407: 131-134. [CrossRef] [Google Scholar]
  18. Sun H, Zhang Z A, Jin X A, et al. Research on Virtual-real Biaxial Real-time Error Compensation Based on Fuzzy Control Theory[J]. Procedia CIRP, 2018, 76:115-120. [Google Scholar]
  19. K.C. Fan, H. Wang, J.W. Zhao, T.H. Chang. Sensitivity analysis of the 3-PRS parallel kinematic platform of serial-parallel machine tool[J]. International Journal Machine Tools and Manufacture,2013,43(15):1561-1569 [Google Scholar]
  20. ZHOU HongBin. Research on Accuracy Analysis and Error Compensation, Beijing University of Science and Technology, Beijing, China [Google Scholar]
  21. Zhou Hongbin, Zhang Jianmin, Fu Hongwei, Li Shaoling. Research on Error Compensation Technology of Workpiece for PRS - XY Hybrid NC Machine Tool. Journal of Beijing Institute of Technology, 2007,1 [Google Scholar]
  22. Zhou Hongbin, Zhang Jianmin, Fu Hongwei, Li Shaoling. Rapid Detection Technology of Key Structure Parameters of PRS - XY Hybrid NC Machine Tool Based on Ballbar. Machine tools and hydraulic, has been hired, 2015,9 [Google Scholar]
  23. Delta Tau Data System Inc. Open Servo User’s Manual. Chatsworth,USA:Delta Tau Data System Inc,2016 [Google Scholar]
  24. Delta Tau Data System Inc.Pewin32PRO Software Reference Manual. Chatsworth,USA:Delta Tau Data System Inc,2016 [Google Scholar]
  25. Shi H, Su H J, Dagalakis N, et al. Kinematic modeling and calibration of a flexure based hexapod nanopositioner[J]. Precision Engineering, 2013, 37(1):117 – 128. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.