Open Access
| Issue |
ITM Web Conf.
Volume 72, 2025
III International Workshop on “Hybrid Methods of Modeling and Optimization in Complex Systems” (HMMOCS-III 2024)
|
|
|---|---|---|
| Article Number | 01006 | |
| Number of page(s) | 7 | |
| Section | Advances in Hybrid Modeling and Optimization Techniques | |
| DOI | https://doi.org/10.1051/itmconf/20257201006 | |
| Published online | 13 February 2025 | |
- A.C. Zhukova, D.L. Schwartz, The determing of thermo mecanical coefficients for steel grades as st6 and 20 (B.N. Yeltsin First President of Russia UrFU, Ekaterinburg, 2014) [Google Scholar]
- A.L. Ostapenko, E.A. Rudenko, L.A. Kurdyukova, Ferrous metallurgy. Bulletin of scientific, technical and economic information 6, 38-44 (2013) [Google Scholar]
- S. Dourandish, H. Champliaud, J.B. Morin, et al., Int J Adv Manuf Technol 123, 2833–2851 (2022) [CrossRef] [Google Scholar]
- F.C. Ren, J. Chen, F. Chen, Trans Nonferrous Metals Soc China (Engl Ed) 24, 1407-1413 (2014) [CrossRef] [Google Scholar]
- A. Sanrutsadakorn, V. Uthaisangsuk, S. Suranuntchai, B. Thossatheppitak, Adv Mater Res 410, 230-233 (2012) [Google Scholar]
- K. Chadha, D. Shahriari, R. Tremblay, P.P. Bhattacharjee, M. Jahazi, Metall Mater Trans A: Phys Metall Mater Sci 48, 4297-4313 (2017) [CrossRef] [Google Scholar]
- J. Mackerle, Engineering Computations 21, 891-940 (2004) [CrossRef] [Google Scholar]
- F. Chen, F. Ren, J. Chen, Z. Cui, H. Ou, Int J Adv Manufacture Technology 82, 85-98 (2016) [CrossRef] [Google Scholar]
- A.V. Tretyakov, V.I. Zyuzin, Mechanical Properties of Metals and Alloys in Metal Pressure Treatment (Metallurgy, Moscow, 1973) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.