EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 65 (2024) ITM Web Conf., 65 (2024) 01002 References
Open Access
Issue
ITM Web Conf.
Volume 65, 2024
International Conference on Multidisciplinary Approach in Engineering, Technology and Management for Sustainable Development: A Roadmap for Viksit Bharat @ 2047 (ICMAETM-24)
Article Number 01002
Number of page(s) 7
Section Mechanical Engineering
DOI https://doi.org/10.1051/itmconf/20246501002
Published online 16 July 2024
  1. K.H. Ho and S.T. Newmen (2003), “State Of The Art Electrical Discharge Machining”, International Journal of Machine Tools & Manufacture 43, 1287–1300. [CrossRef] [Google Scholar]
  2. Anup Kummar Singh, Snjeev Kumaar, P Singh (2013), “Electrical Discharge Machining of Super alloys: A Review”, IJRMET Vol.3 ISSN: 2249-5770. [Google Scholar]
  3. R. Dehmolaei, M. Shamanian and A. Kermanpur (2009), “Microstructural changes and mechanical properties of Incoloy 800 after 15 years service”, MATERIALS CHARACTERIZATION 60, 246–250. [CrossRef] [Google Scholar]
  4. Rahul Mahajan, Hare Krishna and Ankit Kumar Singh “A Review on Copper and its alloys used as electrode in EDM” (2018), Materials Science and Engineering 377, 012183. [Google Scholar]
  5. Gagan Goyal and Ashok Choudhary (2013), “Performance Evaluation of Wire EDM on Incoloy800 by ―Taaguchi Method”, JOURNAL OF LATEST TRENDS IN ENGINEERING AND TECHNOLOGY (IJLTET) VOL. 2, 2278–621X [Google Scholar]
  6. M. Jagadeeswara Rao, Riyaz Uddien Sheikh and K. Buschaiah (2019), “Grey Relational Analysis of EDM Process Parameters For Incoloy 800”, ICETE 2, 476–482 [Google Scholar]
  7. P. Kuppan, S. Narayanan, R. Oyyaravelu and A. S. Balan (2017), “Performance evolution of electrode materials in electric discharge deep hole drilling of Inconel 718 super alloy”, Springer Verlage London limited [Google Scholar]
  8. M. Kliuev, M. Boccadoro, R. Perez, W. Dalbo and F. Kustar (2013), “EDM Drilling and Shaping of Cooling Holes in Inconel 718 Turbine Blades”, procedia Cirp 42, 322–327 [Google Scholar]
  9. M. Manohar, T. Selvaraj, D. Sivakumar, Shibu Gopinath and Koshy M George (2004) “Experimental study to assess the effect of electrode bottom profiles while machining inconel through EDM process”, Procedia Material Science 6, 92–104 [Google Scholar]
  10. H. C. Tsai, B.H. Yan and F. Y. Huang (2003), “EDM performance of cr/cu based composite electrodes”, International Journal of Machine Tool & Manufacture 43, 245–252 [CrossRef] [Google Scholar]
  11. M. Ghoreishi and J. Attkinsions (2002), “A comparative experimental study of machining characteristics in vibratory, rotary and vibro rotary electro discharge machining.”, journal of material processing technology 120, 374384 [CrossRef] [Google Scholar]
  12. Li Li, Y. S. Wong, J. Y. H. Fub and Luu (2001), “Edm performance of tic copper based sintered electrodes.” materials & design vol. 22, 669–678 [CrossRef] [Google Scholar]
  13. Narcis Pellicer, Joaquim Ciuranaand Jordi Delgado (2009), “Tool Electrode Geometry and Process parameters influence on different feature geometry and surface quality in electrical discharge machining of AISI H13 steel”, Springer Science Business Media. [Google Scholar]
  14. Siba Sankar Mahapatra, Bibhuti Bhusan Biswal, Saurav Datta and Rahul (2017), “electrical discharge machining of inconel 825 using cryogenically treated copper electrode: emphasis on surface integrity and metallurgical characteristics”, journal of manufacturing process 26, 188–202. [CrossRef] [Google Scholar]
  15. Roger kern (2008), “The selection of most appropriate sinker EDM electrode material”, EDM Today, July/August Issue. [Google Scholar]
  16. Biing Hwa Yan, Hsien Chung Tsai and Fuang Yuan Huang (2005), “The effect in EDM of a dielectric of a urea solution in water on modifying the surface of titanium.”, International Journal of Machine Tools & Manufacture 45, 194–200. [CrossRef] [Google Scholar]
  17. P. Pecas and E. Henriques (2003), “Influence of Silicon Powder-Mixed Dielectric On Conventional Electrical Discharge Machining.” international journals of machine tool & manufacturing 43, 1465–1471 [CrossRef] [Google Scholar]
  18. Raju B, Bhosle and S. B. Sharma (2017), “Multi-performance optimization of micro-EDM drilling process of Inconel 600 alloy”, Materials Today: Proceedings 4, 1988–1997 [Google Scholar]
  19. C.J. Luis, I. Puertasand G. Villa (2005) “Material removal rate and electrode wear study on the EDM of silicon carbide”, Journal of Materials Processing Technology 164–165, 889–896 [CrossRef] [Google Scholar]
  20. I. Puertas, C.J. Luis and L. Álvarez (2004) “Analysis of the Influence of EDM Parameters On Surface Quality, MRR and EW of WC– Co”, journal of material processing technology 153–154, 1026–1032 [CrossRef] [Google Scholar]
  21. M. Mahalingam (2017), “Review on Machining of Nickel Based Alloy Using EDM and WEDM”, IJSRT Vol. 3, 2395–6011 [Google Scholar]
  22. Misbah Nimat, Shoaib Sarfraz and Haris Aziz (2017), “Effect of Different Dielectrics on Material Removal Rate, Electrode Wear Rate and Microstructures in EDM”, Procedia CIRP 60, 2–7. [CrossRef] [Google Scholar]
  23. Zia Zhixin and Zhang Jianhua (1995), “Ultrasonic vibration pulse electro discharge machining of holes in ceramic”, Journal of Materials Processing Technology 53, 811–816. [CrossRef] [Google Scholar]
  24. Eckart Uhlmann, Tassilo Maria and Ivan Perfilove (2016), “comparative Analysis of dry EDM and conventional EDM”, Procedia CIRP 42, 173–178. [CrossRef] [Google Scholar]
  25. Dhirendranathmishra, Aarti Bhatia and Vaibhav Rana, “Study on Electro Discharge Machining”, The International Journal Of Engineering And Science (IJES). [Google Scholar]
  26. Vinod Kumar, Kamal Jangra and Vikas Kumar (2012), “EFFECT OF WEDM PARAMETERS ON MACHINABILITY OF NIMONIC90”, Trends and Advances in Mechanical Engineering, YMCA University of Science & Technology, Faridabad, Haryana, Oct 19–20 [Google Scholar]
  27. Muthu Kumar and Suresh Babu (2010), “Optimization of the WEDM Parameters on Machining Incoloy800 Super alloy with Multiple Quality Characteristics.”, International Journal of Engineering Science and Technology Vol. 2(6), 1538–1547 [Google Scholar]
  28. S. H Lee and X. P Li (2001) “study of effect of machining parameter on the machining characteristics in electrical discharge machining of tungsten carbide”, journal of material processing technology 115, 344–358 [CrossRef] [Google Scholar]
  29. Srinivas Viswanth and Ramanujam (2018), “A Review of Research Scope on Sustainable and Eco-Friendly Electrical Discharge Machining (E-EDM)”, Materials Today: Proceedings 5, 12525–12533 [CrossRef] [Google Scholar]
  30. Shivendra Tiwari (2013), “Optimization of Electrical Discharge Machining (EDM) with Respect to Tool Wear Rate”, International Journal of Science, Engineering and Technology Research (IJSETR) Volume 2, Issue 4, April [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.