ITM Web Conf.
Volume 17, 20184th Annual International Conference on Wireless Communication and Sensor Network (WCSN 2017)
|Number of page(s)||8|
|Section||Session 1: Wireless Communication|
|Published online||02 February 2018|
A Low-voltage Programmable Frequency Divider with Wide Input Frequency Range
Institute of RF-&OE-ICs, School of Information Science and Engineering, Southeast University, 210096 Nanjing, China
* Corresponding author: firstname.lastname@example.org
A low-voltage programmable frequency divider with wide input frequency range is fabricated in standard 0.18µm TSMC RF CMOS technology and presented in this paper. Considering the frequency division ratio of dual-modulus prescaler is relatively smaller, a programmable divider with full custom design is used to increase the frequency division ratio and the maximum operating frequency. The frequency division ratio of the programmable frequency divider covers from 64 to 255. And the measured results show that the programmable divider works correctly when the input frequency varies from 0.5 GHz to 6.0 GHz, with 1V supply. Besides, the power consumption is 3.5 mA at the maximum frequency of 6.0 GHz.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.