| Issue |
ITM Web Conf.
Volume 17, 2018
4th Annual International Conference on Wireless Communication and Sensor Network (WCSN 2017)
|
|
|---|---|---|
| Article Number | 01014 | |
| Number of page(s) | 7 | |
| Section | Session 1: Wireless Communication | |
| DOI | https://doi.org/10.1051/itmconf/20181701014 | |
| Published online | 02 February 2018 | |
A IF Signal Precessing System Design Based on Software Radio Platform
Aviation Maintenance NCO Academy of Air Force Engineering University Xinyang Henan, 464000, P. R. China
* Corresponding author: sherilljames@163.com
Software radio is a definition of a design thought about how to implement flexible functions by using fixed hardware platform. Any platform based on this is characterized to be universal, standardized, modular, open and highly flexible. Due to some realistic reasons, a software radio platform is hard to be realized. So, most signal processing is operated after mixing. According to software radio requirements, a “FPGA+ADC+DAC” structure is designed. Compared with former processors, this module has broad application prospects with the small size, low power, configurable and programmable feathers. It has multifunction, such as generating IF signals, performing digital down conversion and realizing the synchronous demodulation and the other functions. This module also provides the extended host interface to communicate with upper computers. According to the practical test, take MSK signal for example, if the bit rate is 1Mb/s, bit error rate is lower than 10-6.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.